EKOFLEX

ACRYLIC-BASED ELASTIC WATERPROOFING

SCOPE OF USE: Acrylic-based ready to use waterproofing mixture for elastic waterproofing of underground parts of buildings, terraces, balconies, kitchens, toilets, impassable roof terraces.

On substrates where deformations and cracks are expected, ECO HYDROFLEX can be reinforced with a mesh of non-alkali glass fiber.

PREPARATION AND APPLICATION: The surface on which ECO HYDROFLEX is applied must be firm, clean and dusted. Fill the cavities on the surface with reinforced flexible fillers. It is necessary to coat the surface with ECO PRIMER SA20 diluted with water in a ratio of 1: 1, and then apply undiluted ECO HYDROFLEX.

It is recommended to reinforce the coating by embossing a fiberglass mesh while the first coat is not dry yet. After complete drying of the first layer (min. 12h), the second layer is applied, and if necessary, a third layer is applied. The time period between the application of the layers should be 12 hours.

INSTALLATION TEMPERATURE: From +5 ºC to +30 ºC. Before the coating hardens completely, it should be protected from the direct impact of rain, fast drying and frost.

SHELF LIFE: 12 months in original packaging.

STORAGE: At a temperature of +5 to + 25, protected from sunlight and freezing.

COLOR: Gray

CONSUMPTION: Approximately 0.7 kg / m2 depending on surface roughness.

PACKAGING: 10kg.